For the layman, a leaky faucet to replace the defective part door. It seems that the law should make a good shower failed to make interventions in their lexicon? Pooh cavalier attempt to repair a printer or cartridge faucet in the sink, here's a phrase that is safe, with lots of joy, welcome. A faulty valve in the shower can be controlled via the same mechanism.

With a socket wrench, an hour of yourvaluable time and an investment of less than $ 50, set on your way to stop the drop by drop dirty-saga.

Seven steps to success

Here's what you always wanted to know but do not know who to ask:

Start by cutting water for the shower. With a boxcutter, remove the shower handle cap and shows more of a look into the screw.
Solved with a screwdriver and remove the screw. Take the handleand keep safe.
In other small screwdriver, lift the U-shaped cartridge retaining clip. Remove the nut that locks the cartridge into the valve.
Remove the cartridge with some help from tongs.
Provision of open water for some time. This exercise thread lock dirt and debris from all parts of the body of the valve.
Using an old soft toothbrush to remove all traces of dirt and mud. Check the presence of O-ring worn on the bottomstrain. Replaced.
Install all components in reverse order.

Well, a test

After running the repair is completed, it is time to assess the degree of success. Open the water line, and voila, your efforts have borne fruit. What happens if the loss is new? Well, do not let that dampen your spirits again. A repair kit cartridge is sure to fix it permanently.

Related posts:

1. Leaky Shower Faucet – Fix it Easy and Fast
2. Stopping a leaky faucet – errors can be very expensive
3. How to Fix That Leaky Bathtub Faucet – Fast!
4. Stopping a Leaky Shower Faucet – Mistakes Can Be Very Expensive
5. Faucet Repair – Shower in order?