The installation of a faucet is not a Herculean task. If you have the right of tricks is as easy as evocation of a rabbit in the air. How to install a shower in 7 easy steps.

Before starting the installation Here are some things that must be protected.

Check the pipe to check for leaks.
Replace the wall with moisture resistant drywall as a base for wall, ceiling.
Always clean tube with threaded pipe and a new common agent.
Run hot and coldLines attached to the shower mixing valve.
Plan a hatch in the wall.

These are just a few tips, you must be careful before installing. Now start the installation.

First you can connect to two types of shower. You can use the traditional method with copper pipes, or you can choose PEX. Plastic is easy to install, compared with copper.
The next thing you do is turn off the water and practice aHole in the shower walls with a saw. And 'better plan first hand, where the installation of the shower and faucet, and marks with a pencil.
Now the position of the valve, so OP indication points upward and then the hot and cold water pipes connected to both sides of the valve. During the welding of them sure to see that overheating does not occur. You can also weld adapter, if necessary. Secure the valve in the wall and connect the hose to lift and spout tubeswelded adapters. When the valve outside the store, then use a brass cap, the socket is blocking is not used. Place the square in the shower. This is the installation of the valve.
Since the tap handles, push the decorative plate of the valve and the position of the handle on the screw cartridge with Allen wrench.
Now to install a shower head in relation to the main power line above the head after the use of Teflon tape shower. Wrap-clock showerTubes Chef's threads with Teflon tape. Manually screw showerhead with adjustable wrench.
The final installation of the spout, turn the tap on the copper pipe, screw up. Tighten the screw with Allen and then billed the normal position.
Last but not least, open the hot and cold water and make sure that there are no leaks. Next, open the faucet hot situation that all the air in the pipes to release the prisoners.

That's it. The game is done. Now you can show yourCapacity of your wife or your neighbor.

Related posts:

1. How to Install a Shower Faucet in 7 Easy Steps
2. How to Install a Shower Filter
3. How to Install a Vessel Sink Faucet
4. How to install a vessel sink faucet
5. How do I install a vessel sink faucet